J Swap Conversion Harness (2nd Gen)
***************************
OFFROAD USE ONLY
***************************
Finally, a J Swap Conversion Harness that makes a J Swap as easy as a K Swap.
These conversion harnesses permit the use of 03-07 Accord and 04-05 TL* J swaps into 92-00 Civic and 94-01 Integra chassis.
100% compatible with our J Series 2nd Gen E-Throttle (DBW) Harnesses!
Similar to K series conversion harnesses, there are a few wires to be connected. Just email us when you receive the harness, and we'll help you through the process!
*Requires sending in the TL ECU harness section to us for swapping in the appropriate connector.
NOTES:
- The ECU, immobilizer, and key should be from the same vehicle (be sure to grab the pedal sensor and TAC module, too!).
- Not all engines had IMRC ("Intake Butterflies") equipped intake manifolds, so make sure that the one for the swap does have that.
- Swaps can use either TL or Accord ECUs, but the TL ECU is recommended (especially if using an Odyssey J35A6), but the immobilizer, key, and ECU must be synced.
- CEL will not be functional, but an OBD2 DLC port is included to permit checking codes and data.
If you have any questions, let us know prior to ordering so that we can help!
Wire Harness Return/Cancellation Policy
For all in-stock wire harnesses, there is a 30% restocking fee for all returns.
However, we will accept cancellations for in-stock harnesses PRIOR to shipping without a restocking fee.
Once an item has been shipped, it CANNOT be cancelled for any reason.For custom items, there are absolutely no cancellations, no returns, and no refunds. No exceptions.